Green and Rapid Microwave Synthesis of Cobalt Oxide Nanoparticles from Raphanus sativus Leaf Extract:
Characterization and Catalytic Performance
Ketakee Nichat1*, Pratiksha Makode2, Megha Kosarkar2, Anuja Gawai1,
Amruta Pandav2, Janvi Nishanrao2
1Department of Pharmaceutics, School of Pharmacy, GH Raisoni University, Amravati – 444701.
2Department of Pharmaceutical Chemistry, School of Pharmacy, GH Raisoni University, Amravati – 444701.
*Corresponding Author E-mail: ketakee.nichat@gmail.com
ABSTRACT:
In recent years, cobalt oxide nanoparticles (CoONPs) have drawn significant attention due to their unique physical, chemical, and optical properties. In this work, we report a simple, rapid, and environmentally friendly method to synthesize CoONPs using microwave irradiation and aqueous extract of radish leaves (Raphanus sativus). The leaf extract acts as both a reducing agent and a stabilizer, eliminating the need for toxic chemicals. The formation of CoONPs was confirmed by a color change to dark brown and further characterized using UV-Visible spectroscopy, Fourier Transform Infrared (FTIR) spectroscopy, X-ray diffraction (XRD), and Transmission Electron Microscopy (TEM). TEM analysis revealed that the nanoparticles are mostly spherical with an average diameter of 8±2 nm. The synthesized nanoparticles demonstrated excellent catalytic activity in the reduction of Methylene Blue (MB), Congo Red (CR), and 4-nitrophenol (4-NP) in the presence of sodium borohydride (NaBH₄). The reaction kinetics followed a pseudo-first-order model, with rate constants calculated as 0.332min⁻¹ (MB), 0.443min⁻¹ (CR), and 0.330min⁻¹ (4-NP). These findings suggest that radish leaf extract-mediated CoONPs are promising candidates for the eco-friendly treatment of dye-contaminated industrial wastewater.
KEYWORDS: Green synthesis, Cobalt oxide nanoparticles, Raphanus sativus, Microwave irradiation, Catalytic reduction, Textile dyes.
INTRODUCTION:
Over the past few decades, rapid industrialization has brought convenience but also serious environmental consequences. Among the various types of pollution, water contamination stands out as a critical threat to both human health and aquatic ecosystems. A major contributor to this problem is the discharge of untreated or poorly treated industrial effluents containing synthetic dyes and phenolic compounds. These substances are widely used in industries such as textiles, leather, paper, plastics, cosmetics, and food processing. Unfortunately, many of these dyes, including azo dyes like Congo Red and Methylene Blue, are highly stable under light and heat, making them resistant to natural degradation. Their presence in water bodies reduces light penetration, disrupts photosynthesis in aquatic plants, and poses long-term ecological risks1-3. The U.S. Environmental Protection Agency (EPA) has classified several nitrophenol derivatives and azo dyes as priority pollutants due to their toxicity and persistence. Therefore, developing efficient and sustainable methods to remove or degrade these contaminants is urgently needed4-6.
Over the years, various techniques have been explored for dye removal, including physical adsorption, chemical oxidation, membrane filtration, and biological degradation. However, many of these methods suffer from limitations such as high cost, low efficiency, or the generation of secondary pollutants. In this context, metal oxide nanoparticles have emerged as powerful catalysts due to their high surface area, unique electronic properties, and strong catalytic activity. Among them, cobalt oxide nanoparticles (CoONPs) have gained special interest because of their applications in gas sensors, batteries, supercapacitors, and catalysis7-9.
Traditional methods for synthesizing CoONPs often involve harsh chemicals, high temperatures, and high pressures, which are not only expensive but also harmful to the environment. To overcome these challenges, green synthesis using plant extracts has become a popular alternative. Plant extracts contain bioactive molecules such as flavonoids, phenols, tannins, and alkaloids that can reduce metal ions and stabilize the formed nanoparticles. For instance, earlier studies have successfully used extracts from Populus ciliata, Litchi chinensis, and Euphorbia tirucalli for the synthesis of CoONPs10.
In this study, we selected radish leaves (Raphanus sativus) as the bio-source. Radish is a common medicinal plant known to contain papain, flavonoids, ascorbic acid, glucosinolates, and other phytochemicals. These compounds not only help in the reduction of cobalt ions but also act as capping agents, preventing nanoparticle aggregation. We used microwave irradiation to accelerate the reaction, making the process faster, energy-efficient, and more uniform. The synthesized CoONPs were thoroughly characterized, and their catalytic efficiency was tested against three different pollutants: Methylene Blue, Congo Red, and 4-nitrophenol.
MATERIALS AND METHODS:
Chemicals and Reagents:
Cobalt nitrate hexahydrate (Co(NO₃)₂·6H₂O, 99% purity) was obtained from Sigma Aldrich, India. Methylene Blue (MB), Congo Red (CR), 4-nitrophenol (4-NP), and sodium borohydride (NaBH₄) were of analytical grade and used without further purification. Double-distilled (DD) water was used throughout the experiments.
Collection and Preparation of Radish Leaf Extract:
Fresh and healthy radish leaves were collected from a local garden in Amravati city, washed thoroughly with tap water followed by DD water, and shade-dried for 10–12 days. The dried leaves were ground into a fine powder using an electric grinder. For extract preparation, 2g of leaf powder was added to 100mL of DD water in a 250mL Erlenmeyer flask and heated at 55°C for 30 minutes under continuous stirring. After cooling to room temperature, the mixture was filtered through Whatman No. 1 filter paper. The clear greenish filtrate was stored at 4°C for further use11-12.
Microwave-Assisted Synthesis of CoONPs:
In a typical synthesis, 50mL of 2mM cobalt nitrate solution was added dropwise to 15mL of radish leaf extract under constant stirring at room temperature. The mixture was stirred for 30minutes to allow complex formation. Then, the beaker was placed in a domestic microwave oven (operating at 450W) and irradiated for 4 minutes. During this time, the solution changed from pale pink to dark brown, indicating the formation of CoONPs. The resulting suspension was centrifuged at 10,000rpm for 15minutes, washed several times with DD water and ethanol to remove unreacted impurities, and finally dried in a hot air oven at 60°C overnight13-15.
Catalytic Reduction Experiments:
All catalytic reactions were carried out in standard quartz cuvettes, and the progress was monitored using a UV-Vis spectrophotometer16-18.
For MB and CR:
2.5mL of 1mM dye solution was mixed with 1.5mL of 10mM NaBH₄ in a cuvette. Then, 10mg of CoONPs was added, and the absorption spectra were recorded at regular time intervals (every 1minute) over a range of 400–800nm for MB and 400–600nm for CR. A control experiment without CoONPs was also performed for 30 minutes.
For 4-NP:
1.6mL of 0.2mM 4-NP solution was mixed with 1mL of 2mM NaBH₄. After adding 10mg of CoONPs, the absorption spectra were recorded from 250 to 500nm every 1minute for 7minutes. The reduction was indicated by a decrease in the peak at 400nm and the appearance of a new peak at 297nm corresponding to 4-aminophenol (4-AP).
Characterization Techniques:
The synthesized CoONPs were characterized using19-21:
· UV-Vis Spectroscopy: Shimadzu UV-1800 spectrophotometer (range 200–800 nm)
· FTIR Spectroscopy: PerkinElmer Spectrum Two (KBr pellet method, 4000–400 cm⁻¹)
· XRD: Rigaku Ultima IV diffractometer (Cu Kα radiation, λ = 1.5406 Å, 2θ range 10–80°)
· TEM: JEOL JEM-2100 (operating at 200 kV)
· Zeta Potential & DLS: Malvern Zetasizer Nano ZS (for surface charge and hydrodynamic size)
· TGA: PerkinElmer TGA 4000(heating rate 10°C/min under N₂ atmosphere)
RESULTS AND DISCUSSION:
Visual Observation and UV-Vis Spectroscopy:
The formation of CoONPs was first confirmed visually by a color change from pale pink to dark brown within 4 minutes of microwave irradiation. This color change is due to the surface plasmon resonance (SPR) effect, which arises from the collective oscillation of conduction band electrons in the nanoparticles. The UV-Vis spectrum showed a broad absorption peak centered at 504nm (Figure 1), which is characteristic of cobalt oxide nanoparticles. This peak falls within the typical SPR range of 350–550nm reported for CoONPs. The broadness of the peak suggests a slight variation in particle size, which is common in green synthesis.
Figure 1: UV-Vis absorption spectrum graph with wavelength (nm)
FTIR Analysis-Identifying Functional Groups:
FTIR spectroscopy was used to identify the possible biomolecules responsible for the reduction and stabilization of CoONPs. The FTIR spectrum of the synthesized nanoparticles (Figure 2) exhibited several characteristic peaks. The FTIR spectrum of the biosynthesized cobalt oxide nanoparticles revealed several characteristic absorption bands that confirm the presence of phytochemicals from radish leaf extract acting as reducing and stabilizing agents. A broad and strong peak at 3343 cm⁻¹ corresponds to O–H stretching vibrations of phenols and alcohols, while the weak band at 2917 cm⁻¹ is assigned to aliphatic C–H stretching. The sharp peak at 1740 cm⁻¹ indicates carbonyl (C=O) stretching, likely from flavonoids or tannins, and the band at 1608 cm⁻¹ arises from aromatic C=C resonance vibrations. Additionally, the peak at 1352 cm⁻¹ is due to C–H deformations and in-plane O–H bending, and the band at 1022 cm⁻¹ is attributed to C–O–C glycosidic linkages as well as secondary alcohol and phenol C–O stretching. Collectively, these FTIR peaks confirm that functional groups such as hydroxyl, carbonyl, and aromatic rings are present on the nanoparticle surface, which not only facilitate the reduction of cobalt ions but also prevent agglomeration by acting as a capping layer.
These peaks confirm the presence of flavonoids, tannins, phenols, and proteins in the radish leaf extract. Such molecules are known to coat the nanoparticle surface, preventing agglomeration and providing long-term stability. The slight shift in some peak positions compared to pure extract indicates interaction between the phytochemicals and the cobalt ions.
Figure 2: FTIR spectrum of the Synthesized CoONPs
XRD Analysis-Crystal Structure and Size:
The XRD pattern of the synthesized CoONPs is shown in Figure 3. Distinct diffraction peaks were observed at 2θ values of 31.66°, 36.45°, 45.48°, 56.53°, 61.45°, 66.17°, and 75.25°, corresponding to the (220), (311), (400), (422), (511), (440), and (533) planes, respectively. These peaks match well with the standard JCPDS card No. 42-1467, confirming the formation of a cubic spinel phase of Co₃O₄. The sharp and intense peaks indicate high crystallinity which can be seen in Figure 3.The average crystallite size (D) was calculated using the Debye–Scherrer equation:
D=Kλ/βcosθ
where K = 0.94, λ = 1.5406 Å, β = full width at half maximum (FWHM), and θ = Bragg angle. The calculated crystallite size was approximately 7.5nm, which is in good agreement with the TEM results.
Figure 3: XRD pattern graph of the Synthesized CoONPs
TEM Analysis-Morphology and Size Distribution: TEM was used to directly visualize the shape and size of the nanoparticles. The TEM image (Figure 4a) shows that most of the CoONPs are spherical and well-dispersed, with only minor aggregation. The particle size distribution histogram (Figure 4b) was constructed by measuring over 200 particles. The sizes ranged from 3 to 20 nm, with an average diameter of 8 ± 2 nm. This narrow size distribution indicates good control over the synthesis process, thanks to the stabilizing action of the radish leaf phytochemicals.
Figure 4a: High-resolution TEM image showing spherical dark nanoparticles (cobalt oxide)
Figure 4b: Histogram plot of particle size Distribution (nm)
Zeta Potential and Stability:
The zeta potential of the CoONPs was measured to be –28.5 mV, indicating moderate to good colloidal stability. The negative surface charge arises from the adsorbed hydroxyl and carboxyl groups of the phytochemicals, which create electrostatic repulsion between particles and prevent aggregation.
Thermogravimetric Analysis (TGA):
TGA was performed to evaluate the thermal stability and organic content of the synthesized CoONPs. A gradual weight loss of about 12% was observed up to 250°C, corresponding to the removal of adsorbed water and decomposition of loosely bound phytochemicals. A second weight loss of about 8% between 250°C and 500°C is attributed to the decomposition of strongly bound organic capping agents. Above 500°C, no significant weight loss occurred, indicating the formation of pure, thermally stable CoONPs.
CATALYTIC ACTIVITY STUDIES:
Catalytic Reduction of Methylene Blue (MB):
Methylene blue is a cationic dye widely used in textile and biological staining. In its oxidized form, it is blue and shows a strong absorption peak at 664 nm. Upon reduction, it converts to colorless leuco-methylene blue.
Control experiment (without CoONPs):
As shown in Figure 5a, the addition of NaBH₄ alone caused only a very slight decrease in the 664 nm peak over 30 minutes, confirming that NaBH₄ alone is insufficient to reduce MB at a significant rate.
With CoONPs:
When CoONPs were added (Figure 5b), the absorption peak at 664 nm decreased rapidly and disappeared completely within 7 minutes. No new peaks appeared, confirming complete conversion to the colorlessform. The reaction followed pseudo-first-order kinetics, as evidenced by the linear plot of ln(A₀/Aₜ) versus time (Figure 5c). The rate constant (k) was calculated as 0.332 min⁻¹.
Catalytic Reduction of Congo Red (CR):
Congo red is a diazo dye that is carcinogenic and resistant to degradation. It shows two absorption peaks: one at 350 nm and another at 498 nm.
Without Catalyst:
The absorption intensity decreased very slowly over 30 minutes (Figure 6a), indicating negligible reduction and withCoONPs the data is shown in Figure 6b, the peak at 498 nm dropped sharply within 5 minutes of adding CoONPs. The reduction was complete within 5 minutes, which is even faster than MB. The rate constant was 0.443 min⁻¹ (Figure 6c), suggesting that CR is more easily reduced under these conditions.
Figure 5: Kinetic Study and Catalytic Performance of Cobalt Oxide Nanoparticles (CoONPs) in Methylene Blue Degradation
Figure 6: Kinetic Study and Catalytic Performance of Cobalt Oxide Nanoparticles (CoONPs) in Congo Red Dye Reduction
Figure 7: Catalytic reduction of 4-nitrophenol (4-NP) to 4-aminophenol (4-AP) using green-synthesized CoONPs in the presence of NaBH₄.
Catalytic Reduction of 4-Nitrophenol (4-NP):
4-NP is a common industrial pollutant and a model compound for studying catalytic reduction. In water, 4-NP shows a peak at 317nm. Upon addition of NaBH₄, the peak shifts to 400nm due to the formation of the 4-nitrophenolate ion.
Without Catalyst:
The peak at 400nm remained unchanged for hours (Figure 7a), confirming that the reaction does not proceed without a catalyst and withCoONPs upon adding CoONPs (Figure 7b), the peak at 400nm steadily decreased, and a new peak appeared at 297nm, corresponding to 4-aminophenol (4-AP), the reduced product. The reaction was complete within 7 minutes. The rate constant was 0.330 min⁻¹ (Figure 7c)
Comparison of Catalytic Efficiency: The higher rate constant for CR suggests that the azo bonds in CR are more susceptible to catalytic hydrogenation under the influence of CoONPs. The slightly lower rate for 4-NP and MB may be due to steric hindrance or differences in adsorption affinity on the nanoparticle surface. The data can be seen in Table 1 respectively.
Table 1: Summary of Catalytic Reduction Parameters
|
Dye/Pollutant |
λ_max (nm) |
Time for complete reduction (min) |
Rate constant k (min⁻¹) |
R² value |
|
Methylene Blue |
664 |
7 |
0.332 |
0.992 |
|
Congo Red |
498 |
5 |
0.443 |
0.995 |
|
4-Nitrophenol |
400 |
7 |
0.330 |
0.991 |
Proposed Mechanism:
The catalytic reduction of dyes by CoONPs in the presence of NaBH₄ follows a Langmuir–Hinshelwood mechanism. First, both the dye molecules and BH₄⁻ ions are adsorbed onto the surface of the CoONPs. The nanoparticles act as electron relays, facilitating the transfer of hydride ions (H⁻) from BH₄⁻ to the dye molecules. For nitro compounds like 4-NP, the –NO₂ group is reduced to –NH₂. For azo dyes like CR, the –N=N– bond is cleaved to form aromatic amines. The phytochemical coating on the nanoparticles does not block the active sites but rather prevents aggregation, thereby maintaining high catalytic activity.
Reusability of the Catalyst:
To test reusability, the CoONPs were recovered after each catalytic run by centrifugation, washed with ethanol, and reused for up to 5 cycles. The catalytic efficiency remained above 85% even after 5 cycles, indicating good stability and reusability. The data can be recognized from Table 2.
Table 2: Reusability of CoONPs for MB Reduction
|
Cycle |
Reduction efficiency (%) |
|
1 |
98.5 |
|
2 |
96.2 |
|
3 |
93.8 |
|
4 |
89.4 |
|
5 |
85.1 |
CONCLUSION:
In this study, we successfully developed a rapid, eco-friendly, and cost-effective method for synthesizing cobalt oxide nanoparticles using radish leaf extract and microwave irradiation. The phytochemicals present in the extract acted as both reducing and capping agents, eliminating the need for toxic chemicals. The synthesized CoONPs were spherical, well-dispersed, and had an average size of 8±2nm. They exhibited excellent catalytic activity for the reduction of Methylene Blue, Congo Red, and 4-nitrophenol in the presence of NaBH₄, with rate constants ranging from 0.330 to 0.443 min⁻¹. The nanoparticles could be reused for up to five cycles with minimal loss in activity. Our findings suggest that radish leaf extract-mediated CoONPs are promising candidates for the treatment of dye-contaminated industrial wastewater. Future work may focus on scaling up the synthesis and testing the catalyst on real industrial effluents.
ACKNOWLEDGEMENT:
The Authors are thankful to the management of School of Pharmacy, GH Raisoni University, Amravati for the help provided in order to carry out the research activity which was essential in order to complete the project.
REFERENCES:
1. Reddy GB, Madhusudhan A, Ramakrishna D, Ayodhya D, Venkatesham M, Veerabhadram G. Green chemistry approach for the synthesis of gold nanoparticles with gum kondagogu: characterization, catalytic and antibacterial activity. Journal of Nanostructure in Chemistry. 2015 Jun; 5(2):185-93.
2. Seku K, Gangapuram BR, Pejjai B, Hussain M, Hussaini SS, Golla N, Kadimpati KK. Eco-friendly synthesis of gold nanoparticles using carboxymethylated gum Cochlospermumgossypium (CMGK) and their catalytic and antibacterial applications. Chemical Papers. 2019 Jul 1; 73(7):1695-704.
3. Sunkari S, Gangapuram BR, Dadigala R, Bandi R, Alle M, Guttena V. Microwave-irradiated green synthesis of gold nanoparticles for catalytic and anti-bacterial activity. Journal of Analytical Science and Technology. 2017 Jun 3; 8(1):13.
4. Kadir AA, Mohajerani A. Possible utilization of cigarette butts in light-weight fired clay bricks. Environments. 2008; 3:7.
5. Malviya V. Investigation of in-vitro antidiabetic study, antioxidant activity and anthelminthic property of various extracts of bitter cumin seeds: antidiabetic study, antioxidant activity, and anthelminthic property of bitter cumin seeds. International Journal of Pharmaceutical Sciences and Nanotechnology (IJPSN). 2023 Jul 31; 16(4): 6855-74.
6. Wojnarowicz J, Chudoba T, Gierlotka S, Lojkowski W. Effect of microwave radiation power on the size of aggregates of ZnO NPs prepared using microwave solvothermal synthesis. Nanomaterials. 2018 May 18; 8(5): 343.
7. Al-Gaashani R, Radiman S, Tabet N, Daud AR. Effect of microwave power on the morphology and optical property of zinc oxide nano-structures prepared via a microwave-assisted aqueous solution method. Materials Chemistry and Physics. 2011 Feb 15; 125(3): 846-52.
8. Wojnarowicz J, Opalinska A, Chudoba T, Gierlotka S, Mukhovskyi R, Pietrzykowska E, Sobczak K, Lojkowski W. Effect of water content in ethylene glycol solvent on the size of ZnO nanoparticles prepared using microwave solvothermal synthesis. Journal of Nanomaterials. 2016; 2016(1): 2789871.
9. Vinayagam R, Varadavenkatesan T, Selvaraj R. Green synthesis, structural characterization, and catalytic activity of silver nanoparticles stabilized with Bridelia retusa leaf extract. Green Processing and Synthesis. 2018 Feb 23; 7(1): 30-7.
10. Madhumitha B, Santhakumar P, Jeevitha M, Rajeshkumar S. Green synthesis of selenium nanoparticle using capparis decidua fruit extract and its characterization using transmission electron microscopy and UV-visible spectroscopy. Research Journal of Pharmacy and Technology. 2021 Apr 1; 14(4): 2129-32.
11. Malviya V, Tawar M, Burange P, Jodh R. A brief review on resveratrol. Asian Journal of Research in Pharmaceutical Sciences. 2022 May 25; 12(2): 157-62.
12. Thyagarajan R, Narendrakumar G, Rameshkumar V, Varshiney M. Green synthesis of Zirconia nanoparticles based on ginger root extract: Optimization of reaction conditions, application in dentistry. Research Journal of Pharmacy and Technology. 2022 Nov 1; 15(11): 5314-20.
13. Singh A, Joshi NC, Ramola M. Magnesium oxide nanoparticles (MgONps): green synthesis, characterizations and antimicrobial activity. Research Journal of Pharmacy and Technology. 2019 Oct 1; 12(10):4644-6.
14. Ashwini D, Mahalingam G. Green synthesized metal nanoparticles, characterization and its antidiabetic activities-a review. Res. J. Pharm. Technol. 2020; 13(1): 468-74.
15. Agarwal H, Menon S, Rajeshkumar S, Kumar SV. Green synthesis of silver nanoparticle using Kalanchoe pinnata leaf extract and its antibacterial effect against gram-positive and gram-negative species. Research Journal of Pharmacy and Technology. 2018 Sep 1; 11(9):3964-8.
16. Kandhan TS, Roy A, Lakshmi T, Rajeshkumar S. Green synthesis of Rosemary oleoresin mediated silver nanoparticles and its effect on Oral pathogens. Research Journal of Pharmacy and Technology. 2019 Nov 1; 12(11): 5379-82.
17. Gayathri V, Nivedha S, Pujita V, Romauld SI. Green synthesis of copper nanoparticles using bracts of Musa paradisiaca (Monthan) and study of its antimicrobial and antioxidant activity. Research journal of pharmacy and technology. 2020 Feb 1; 13(2): 781-6.
18. Asha S, Thirunavukkarasu P, Rajeshkumar S. Green synthesis of silver nanoparticles using Mirabilis jalapa aqueous extract and their antibacterial activity against respective microorganisms. Research Journal of Pharmacy and Technology. 2017 Mar 1; 10(3):811.
19. Burange PJ, Tawar MG, Bairagi RA, Malviya VR, Sahu VK, Shewatkar SN, Sawarkar RA, Mamurkar RR. Synthesis of silver nanoparticles by using Aloe vera and Thuja orientalis leaves extract and their biological activity: a comprehensive review. Bulletin of the National Research Centre. 2021 Oct 30; 45(1):181.
20. Malviya V, Pande S. A Review of the Most Recent Research on Solid Lipid Nanoparticles, Focusing on Active Compound Encapsulation. Research Journal of Pharmacy and Technology. 2025; 18(4):1658-62.
21. Malviya V, Khan A, Padole S, Thakare V, Gajbhiye T. Solid Lipid Nanoparticles of Resveratrol: Formulation, Characterization and in vitro Anti-Inflammatory Studies. Indian Journal of Pharmaceutical Education & Research. 2026 Jan 1; 60(1).
|
Received on 29.04.2026 Revised on 10.06.2026 Accepted on 14.07.2026 Published on 10.10.2026 Available online from October 17, 2026 Asian J. Pharm. Res. 2026; 16(4):411-416. DOI: 10.52711/2231-5691.2026.00060 ©Asian Pharma Press All Right Reserved
|
|
|
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License. Creative Commons License. |
|